Posted by

Home Improvement

A backsaw is a type of handsaw that is particularly useful for woodworking projects.

What Is a Backsaw

A backsaw is a specialized type of handsaw that is designed for cutting tenons, grooves, or joints in wood. Its blade is rectangular and usually measures between 8 and 14 inches in length. It features a handle made of hardwood or plastic, and a metal-reinforced back edge opposite the teeth to keep the blade from bending while cutting. The blade typically has 11 to 20 teeth per inch, and it is used to cut across the wood grain, similar to a larger and more flexible crosscut saw.

How to Safely Use a Backsaw

Using a backsaw safely requires some preparation. Before cutting, make sure that the wood is firmly held in a wood vice or by clamps so that it will not move during cutting. Once you have measured and marked the cut with a pencil, place the saw’s central teeth on the line and push the saw to start the cut. Continue by carefully guiding the teeth over the line, steadying the blade as needed with your other hand. Work slowly and carefully, and when you are finished, lay the saw down gently where the teeth will not damage other surfaces or cause injury.

How to Maintain a Backsaw

Maintaining a backsaw is important for keeping it sharp and safe to use. It requires periodic sharpening by a professional saw sharpener or with a quality saw sharpening tool that can be found at major hardware stores and some larger saw shops.

Tools Related to the Backsaw

There are many other types of handsaws that are useful for different types of woodworking projects. These include the crosscut saw, ripsaw, keyhole saw, coping saw, and hacksaw. For finer joints, a smaller dovetail saw may be more appropriate. Additionally, power saws can be fitted with tenon-cutting blades for more efficient cutting.

Not what you’re looking for? Try these:

  • Home Repair Tools: Whether you are a seasoned DIY enthusiast or prefer to hire professionals, there are a few essential tools that everyone should have in their toolbox. Learn more in this article.
  • Handsaws: Handsaws are manual cutting tools that come in many different shapes and sizes. Some of the most common types include ripsaws, coping saws, and hacksaws. Discover more about handsaws here.
  • Keyhole Saw: A keyhole saw is a small handsaw that is used for cutting small holes in drywall or wood, such as for electric switches. Learn more about this type of saw here.


1. What is a backsaw?

A backsaw is a type of hand saw that is designed for precise cuts. It has a stiffening rib on the edge opposite the cutting edge to keep the blade from bending during use. Backsaws are commonly used in woodworking to make accurate cuts in hardwoods and other materials. They are also used in metalworking and other industries where precision cutting is required.

2. How is a backsaw different from other saws?

A backsaw is different from other saws in a few ways. First, it has a stiffening rib that runs along the back of the blade, which helps keep the blade from bending during use. Second, the blade is thinner than other saw blades, which allows for more precise cuts. Finally, backsaws typically have a handle that is set at a right angle to the blade, which makes it easier to use in tight spaces and to make accurate cuts.

3. What are some common uses for a backsaw?

Backsaws are commonly used in woodworking to make precise cuts in hardwoods and other materials. They are also used in metalworking and other industries where precision cutting is required. Some common uses for backsaws include cutting dovetail joints, tenon joints, and other types of joints, as well as making straight cuts in wood and other materials.

4. How do you use a backsaw?

To use a backsaw, first mark the line you want to cut on the material you are working with. Then, hold the saw at a right angle to the material with one hand on the handle and the other hand on the back of the blade. Start the cut slowly and use a gentle back-and-forth motion to saw through the material. Make sure to keep the blade perpendicular to the material as you cut. Once you have made the cut, use a chisel or other tool to clean up any rough edges.

5. How do you maintain a backsaw?

To maintain a backsaw, first make sure to keep the blade clean and dry when not in use to prevent rust and corrosion. If the blade becomes dull, you can sharpen it with a file or other sharpening tool. Make sure to file both sides of the blade evenly to maintain the saw’s balance. Finally, if the handle becomes loose or damaged, you can replace it with a new handle or repair it with glue or other materials.

Leave a Reply

Your email address will not be published. Required fields are marked *