How to Empty a Waterbed Without a Pump

Posted by

Home Improvement

A waterbed is a bed that has a mattress containing water that is sealed in a bag [source: Merriam-Webster]. This means that it cannot be moved like a regular mattress and must be emptied before it can be transported. Most waterbeds come with a pump to help drain the water, but what do you do if you have lost your pump and need to move your mattress? Don’t worry, here’s how to empty your waterbed without a pump.

  1. Disconnect the temperature control unit if your waterbed has one.
  2. Connect one end of a garden hose to an outside faucet and the other end to the waterbed’s drain valve. The hose can be lower than the bed.
  3. Turn on the water for 15 seconds. This will create a continuous siphon by pushing the air in the garden hose into the mattress.
  4. Turn off the water and detach the hose from the faucet. Let the hose fall to the ground. As long as this end of the hose is lower than the waterbed, gravity will ensure that the water drains out.
  5. If the water is not flowing freely, you can try sucking the air out of the hose with your mouth. This will help get the water flowing [source: Landandsky].


1. What are the reasons to drain a waterbed without a pump?

There are a few reasons why someone might need to drain their waterbed without a pump. Perhaps they don’t have access to a pump, or they’re trying to avoid the noise or mess that comes with using one. Whatever the reason, it is possible to drain a waterbed without a pump.

2. What materials do I need to drain a waterbed without a pump?

You will need a garden hose, a bucket, and possibly some towels to catch any excess water that spills over the sides of the bed. You may also want to enlist the help of a friend to hold the hose in place while you empty the waterbed.

3. How long does it take to drain a waterbed without a pump?

Draining a waterbed without a pump can take a bit longer than using a pump. Depending on the size of the bed and the water pressure of your hose, it could take anywhere from 1-4 hours to completely empty the bed.

4. What is the process for draining a waterbed without a pump?

First, you’ll need to find the valve on your waterbed and open it up. Then, attach the garden hose to the valve and place the other end of the hose into a bucket or drain. Turn on the water and let gravity do the work of emptying the bed. Be sure to keep an eye on the hose to make sure it doesn’t come loose or start to spray water everywhere.

5. Can I use a siphon to drain my waterbed?

Yes, you can use a siphon to drain your waterbed. Simply place one end of the hose in the waterbed and the other end in a bucket. Suck on the end of the hose to start the siphon and let gravity do the rest. However, this method can be slow and may not work as well for larger waterbeds.

6. How do I know when the waterbed is completely drained?

You’ll know the waterbed is completely drained when no more water comes out of the hose. You can also check the bed itself to make sure there is no more water left inside.

7. How do I prevent mold and mildew from forming in my waterbed?

To prevent mold and mildew from forming in your waterbed, be sure to let it air out completely before refilling it. You can also add a small amount of bleach to the water to kill any bacteria or mold spores that may be present.

8. Is it safe to reuse the water from my drained waterbed?

No, it is not safe to reuse the water from your drained waterbed. The water can become contaminated with bacteria, skin cells, and other debris over time, making it unsanitary for drinking, bathing, or other uses.

9. How often should I drain my waterbed?

You should drain your waterbed at least once a year to prevent the growth of algae, mold, and bacteria. If you notice any unusual odors or discoloration in the water, you may need to drain it more frequently.

Leave a Reply

Your email address will not be published. Required fields are marked *