How to Hang a Window Scarf

Posted by

Home Improvement

Not every window requires fancy curtains or drapes. For windows like those in your bedroom or den, a window scarf will do the job. A window scarf is a piece of fabric that hangs in front of or on the sides of a window. It’s a simple yet elegant way to dress up a window. All you need is the fabric and hardware to hang it. There are various ways to hang a scarf, such as draping it over a curtain rod or hanging it between two brackets, allowing it to curve in the middle [source: Dummies]. The possibilities are endless. So, continue reading to learn how to make and hang a basic window scarf.

Materials required:

  • Fabric
  • Safety pins
  • Thumb tacks
  • Tape measure
  • Ladder

Here’s how you can do it:

  1. Pick the fabric you like. The fabric should be twice the length of the area you want to cover.
  2. Unfold the fabric on a flat surface.
  3. Cut it to the desired length.
  4. Fold the fabric accordion-style lengthwise. You can choose the size of the folds. Secure the folds with safety pins.
  5. Install two brackets on either side of the window and place a pole across them.
  6. Pin the fabric in place with thumb tacks. The thumb tacks should be close to the brackets that will support the scarf [source: window-treatments-made-easy].
  7. Drape the fabric over the pole and remove the safety pins.
  8. Remove the thumb tacks from the fabric and even out the ends. Pull down the center of the scarf slightly at the top of the window.


1. What is a window scarf?

A window scarf is a decorative piece of fabric that is used to dress up a window. It is a long, thin piece of fabric that is draped over the top of the window and down the sides. Window scarves come in a variety of fabrics, colors, and patterns, and can be used alone or with other window treatments.

2. What do I need to hang a window scarf?

To hang a window scarf, you will need a curtain rod, brackets to hold the rod in place, and the scarf itself. You may also need a measuring tape, a level, and a drill if your brackets need to be screwed into the wall.

3. How do I measure for a window scarf?

To measure for a window scarf, measure the width of your window and add 12-18 inches to each side. This will give you enough fabric to drape over the top of the window and down the sides. The length of the scarf will depend on your personal preference and the height of your window.

4. How do I hang the curtain rod?

Start by measuring and marking where you want to install the brackets. Use a level to ensure that they are even. If your brackets require screws, use a drill to make pilot holes, then screw the brackets into place. Once the brackets are secure, insert the curtain rod into the brackets.

5. How do I drape the window scarf?

Start by folding the scarf in half lengthwise. Then, drape it over the curtain rod so that the two loose ends are hanging down the sides of the window. Adjust the scarf as needed so that it is evenly draped over the top of the window. You can also experiment with different ways of draping the scarf, such as twisting it or tying it in a knot.

6. Can I use a window scarf with other window treatments?

Absolutely! Window scarves can be used alone or with other window treatments, such as curtains or blinds. If you are using a scarf with other treatments, choose a color and pattern that complements the other fabrics in the room.

Leave a Reply

Your email address will not be published. Required fields are marked *